Getting a commodious space to save equipment and properties maximizes their safety as well, and that’s why considering building a 10 x 12 storage shed amongst others is optimum. Overall, a storage shed enables one to save up needful tools appropriately. Meanwhile, a 10 x 12 storage shed boosts your chances of getting more than enough spaces.
How to Build a 10 x 12 Storage Shed? 5 Easy Steps
1. Sketch it Down
You’d need to get the best out of this assignment even though you’re a newbie. And, it’s best you sketch down the whole process before you embark on it. You’d need a bag of cement, nine 4” by 4” planks to make upright posts, 2.5-inch nails should be good enough (get several bunches of them), thirty pieces of 2” x 6”, forty pieces of 2” x 4” lumber, 20 pieces of plywood board that’s ample thick, and wait until we explain how the rafter of this would look like.
2. Making the Base
- Dig holes that are 18” deep. Dig four on each of the sides and one at the backside that you’ve set out for the project.
- Insert every one of the 4” x 4” posts in the four dug holes on both sides. You can refill the spaces with the removed sands, or you use the concrete.
- Mix your concrete and fill the holes where the posts are upright. Let the distance from one pole to another be wide evenly.
- It’s time you get the 2” x 4” and start the alignment. Let them run from one post to another by nailing them onto the posts.
- Now, it seems the base is squared, right? Run other sets of 2” x 6” from the front to the back. You can run six pieces in that way. Afterward, cut other long lumber into small sizes to fill the joists evenly.
- Place the thick plywood board on the base and drive the nails from the top to the joisted base.
3. Building the Walls
- Merge a 2” x 6” to the inner side of the first post facing the corresponding side of the second post. Do that to the third and fourth posts likewise.
- Assume/mark the level you want your window to be. Run two 2” x 4” planks horizontally between the two merged posts. Demarcate the middle of the parallel running planks to make a window vacuum.
- Do the same on the third and fourth posts. It’s after that you can apply that to the opposite side too. Let there be 2” by 4” nail from the base upward at the back (leave the front alone).
- You can now run some vertical ones from the base upward. It’s afterward you run a 2” x 6” lumber from one start of a post to the last, and it’s touching the two at the middle (once the tips are connected squarely like it was on the base, then you’re good to go).
4. Making the Rafter
- If you had used either 2” x 4” or 2” x 6” lumbers, then that’s the size that you’d use to run from the front end to the last stop.
- Cut 2” x 6” lumber into pieces (6-8pics should be enough), but each of their heights shouldn’t be lower or exceed 21”.
- Nail the bottom of each on the lumber that’s run in the middle of the squared top. Let equivalent lumber attach from both sides.
- Run lumber that the three tips can be connected to at once, right at the overall top.
- Begin the attachment of the roofing material.
5. Attachment of the Door and Windows
- Craft out the doorway at the front by using two lumbers to demarcate.
- Cut your wide board to a fitting size and nail lumbers at the top, sides, and bottom so that the use can be firm.
- Attach hinges and get the door attached.
- You can use this logic for the making of the windows likewise.
- Cover the joisted walls with plywood boards to make the shed look attractive.
Is it cheaper to build your own shed?
This question is one of the most frequently asked questions about outdoor sheds. The answer is not straightforward. For someone who is experienced in building sheds, it will be a lot cheaper to build his own shed than buy it. He only has to buy the required materials.
Since, he’ll build it himself, he won’t need to pay for labor. From another perspective, you could say he’ll pay for labor with his time. Furthermore, some people are of the opinion that whether you build it or buy the one that has already been built, the costs are about the same.
On the other hand, if you’ve never built a shed before or if you have never done any woodwork project before, it is better to either hire a carpenter to build the shed or buy the one that has already been built. The chances are good that if you try to build it up yourself with your zero experience, you may end up with an unusable shed. That means you may eventually outsource it after wasting a lot of resources.
How much does it cost to build a 10 x 12 feet shed?
After calculating the cost of the required materials and tools, we found out that it will cost you about $6,000 to build a 10 by 12 feet shed. And you should set aside a weekend to build it. If you start before 10am on Saturday, you should be through before the end of Sunday.
If you decide to purchase the shed instead of building it, you’ll have to cough out about $4,500 – $10,000, depending on the quality of the shed. Also, you need to make use of the best wood for your shed. The quality of wood used will determine the quality and durability of the shed. We recommend Timber, Western Red Cedar, or European Oak. The three of them are rot-resistant and visually appealing. You can use a mixture of them or stick with only one of them.
Final Verdict
That’s how to build a 10 X 12 storage shed. The approach is systematic and one that you’d find so easy to carry out. In fact, if your aim is to get a 10 x 12 shed for your garden, then this would be so great for you.
- Make These 10 Delicious Appetizers in Your Air Fryer - September 22, 2023
- How to Cook Lamb Shoulder Chops in Air Fryer? - September 13, 2023
- How to Cook Crinkle Fries in Air Fryer? - September 13, 2023
